Tycon-power UPS-DC1212-9 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Fournisseurs d'énergie Tycon-power UPS-DC1212-9. Tycon Power UPS-DC1212-9 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 8
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
UPS-DC
UPS Pro™ Outdoor
UPS System
Wireless Base Stations
and Client Devices
Surveillance Cameras
Mission Critical Backup
Power
Remote Sensors
Congratulations! on your purchase of the UPS Pro™ Outdoor
UPS backup power system. Please take a moment to review this
Qwik Install Guide before assembly or battery installation.
DANGER! Avoid Powerlines!
You Can Be Killed!
When following the instructions in this guide take extreme care
to avoid contact with overhead power lines, lights and power circuits.
Contact with power lines, lights or power circuits may be fatal. We rec-
ommend to install no closer than 20 feet to any power lines.
Safety: For your own protection, follow these safety rules.
Perform as many functions as possible on the ground
Do not attempt to install on a rainy, windy or snowy day or if
there is ice or snow accumulation at the install site or if the
site is wet.
Make sure there are no people, pets, etc. below when you are
working on a roof or ladder.
Recommended Tools: Phillips Screwdriver, 3mm Allen Wrench,
8mm and 14mm Open End Wrench
Please help preserve the environment and return
used batteries to an authorized depot
Vue de la page 0
1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - UPS System

UPS-DC UPS Pro™ Outdoor UPS System ▫ Wireless Base Stations and Client Devices ▫ Surveillance Cameras ▫ Mission Critical Backup Power ▫ Remote

Page 2 - Qwik Install

2 Qwik Install STEP 0: The UPSPro™ is Solar Ready™ so a solar panel can be add-ed at any time to provide supplemental or full time power. STEP 1: Con

Page 3 - POE-IN of

3 STEP 7: Mount any electronics boards to the metal plate. Install a CAT5 cable between the controller POE OUT and the electronics. There is a secon

Page 4 - TECH CORNER

4 TECH CORNER Additional Information you may find useful 1. CONTROLLER: The controller turns off power to the load at 11V and reconnects when the

Page 5 - SPECIFICATIONS

5 SPECIFICATIONS Subject to change without notice POE Output Voltage (DC) 12V, 18V, 24V or 48V Battery Voltage (DC) 12V Battery Capaci

Page 6

6 12V, 18V, 24V or 48V depending on which model is purchased. There is also an auxiliary protected output on the back of the controller to sup-pl

Page 8

8 8000009 Rev 3 UPS-DC UPSPro™ Qwik Install Guide

Commentaires sur ces manuels

Pas de commentaire