Tycon-power RPPL2424-18-30 Manuel d'utilisateur Page 1

RPPL RemotePro™ Remote Power System ▫ Wireless Base Stations and Client Devices ▫ Surveillance Cameras ▫ Remote Sensors ▫ Remote Lighting ▫ Of

2 Qwik Install STEP 1: Connect 18AWG wire to the solar panel inside wire junction box. Install solar panel to the mount so that junction box is at th

3 connect to the controller solar panel input. Make sure to maintain cor-rect polarity. STEP 5: Install batteries to enclosure using Velcro straps. S

4 TECH CORNER Additional Information you may find useful 1. CONTROLLER: The controller turns off power to the load at 11V and reconnects when the

5 3. Place Optimum Winter Tilt Houston / Cairo 56 deg Albuquerque / Tokyo 60.5 deg Denver / Madrid 65 deg Minneapolis / Milano 69.5 deg Winnipeg

6 VENTING: The enclosure is vented thru the wire feedthrus in the bot-tom of the enclosure. Don’t make these airtight. 4.CHARGING BATTERIES FROM A

7 external controller, You will need to mount the controller inside the en-closure and connect the output of the controller to the batteries. The con

8 8000014 Rev 4 RPPL RemotePro™ Qwik Install Guide