RPST RemotePro™ Remote Power System ▫ Wireless Base Stations and Client Devices ▫ Surveillance Cameras ▫ Remote Sensors ▫ Remote Lighting ▫ Of
10 Wind Turbine TPW-400DT-12/24 400W 12V/24V Wind Turbine Includes Integrated Con-troller with Dump Load Good low wind perfor-mance Self b
11 RemotePro™ Typical Application
12 Limited Warranty The RemotePro™ products are supplied with a limited 24 month war-ranty which covers material and workmanship defects. This warra
2 Qwik Install STEP 1: Add Grounding Wire Between Door and Enclosure: Remove plastic covers on copper studs on inside of door and inside of enclosure
3 STEP 5: If pole mounting the en-closure, assemble the pole mount kit to the back of the enclosure and mount the enclosure to a pole using the 6 hos
4 optimum angle at http://tyconpower.com If you will be using a fixed angle all year we recommend using the optimum angle for win-ter sun. Mount the
5 STEP 10: Install the batteries in the enclosure. If using multiple batteries, con-nect in parallel for 12V output or connect in series for 24V out
6 Note: The green connector on the controller may be-come unplugged due to vi-bration and the weight of the cables. Be sure to add a zip tie or other
7 TECH CORNER Additional Information you may find useful 1. CONTROLLER: The 12V controller turns off power to the load at 11V and reconnects when th
8 in normal use. Note: Never store batteries for any length of time in a discharged state or it will kill the battery. 6. SOLAR PANEL TILT: There i
9 SPECIFICATIONS Subject to change without notice RPST12xx RPST12 RPST24xx RPST24 Battery Capacity 100Ah or 200Ah 50Ah or 100Ah Reser
Commentaires sur ces manuels