Tycon-power ENC-ST-23X14X12 Manuel d'utilisateur télécharger pdf

ENC-ST-23X14X12 Qwik Install

STEP 1: Add Grounding jumper wire between 2 copper studs and use copper wash-

ers and nuts to secure.

STEP 2: Install a hole plug in drain hole in bottom right corner of the enclosure.

STEP 3: Add wire feedthrus into the bottom connector

plate and attach the connector plate.

STEP 4: If pole mounting the enclosure, assemble the pole mount kit to the back of the enclosure and mount

the enclosure to a pole using 6 hose clamps (not included). The enclosure can also be wall mounted using the 4 holes in

the back of the enclosure.

STEP 5: Insert the battery platform in the bottom of the enclosure. The battery platform

has cutouts so wires can be routed under the battery as needed.

Page 1

ENC-ST-23X14X12 Qwik Install STEP 1: Add Grounding jumper wire between 2 copper studs and use copper wash-ers and nuts to secure. STEP 2: Ins

Pas de commentaire

Tycon-power ENC-ST-23X14X12 Manuel d'utilisateur